TP/TO-CF
The TP/TO-CF is an automatic machine designed to cut and form
transistors
in a tube (TO-220, TO-218, TO-126).
All operations are controlled by a PLC. The complete process is
fully automated.
Each type of transistor requires a dedicated die.
Two wire holders lock the leads before the cutting and forming
operation.
The productivity of the TP/TO-CF is approximately 2,500 parts per hour.
TP/TS1
The TP/TS1 is a pneumatic machine designed to cut and form
loose radial components.
There are over 20 standard interchangeable dies available.
Special dies can be
made to
modify the specs of a standard form or a new form can be
developed from a drawing
upon request.